The LOGi-Mark1 can be connected to multiple embedded platforms including the Raspberry Pi, Beaglebone and Arduino.  In order for the LOGi-Mark1 to be able to connect to these platforms, headers must be populated that connect to the respective embedded platform.  In some cases the end user may wish to be able to connect to multiple platforms in a plug and play manner.  It is currently possbile to connect the LOGi-Mark1 to the Raspberry Pi or the Beaglebone by making 2 minor modifications to the LOGi-Mark1. 

Modifications:

1) Add kapton tape or other similar insulator to the exposed header pins shown on the bottom of the LOGi-Mark1 as shown in the red boxes in the image below.

2) Cut the outter row of pins enclosed in the rectangular box below.  Note DO NOT CUT THE INNER ROW OF PINS - MAKE SURE YOU HAVE SELECTED THE CORRECT PINS TO CUT BEFORE CUTTING.  Counting from left to right as shown in the picture, pins 5,6,7,8 and 16 can be cut.  These pins are unused on the beaglebone and need to be cut in order to not conlict when placed with the Raspberry Pi.

Picture of the modified board on the beaglebone and the Raspberry Pi after modification: