›

Problems getting started with blink_app

jonaspljonaspl
in LOGI Troubleshooting Discussion
Hi Forum.

New to LOGI-Bone and to Beaglebone Black I am trying to run the blink_led_app, as a first fumbling step. I have two non-working scenarios; a) the Ubuntu image from ValentFx wiki running from an SD card and b) BBB Debian image running from the internal EMMC. Grateful for any help or suggestions.

Boards
LOGI-Bone R1.5.1
Beaglebone Black Wireless A5

a) Ubuntu image from ValentFx wiki
Unzipped and transferred to SDcard by means of dd. Then starting from SDcard with held boot button this image won't complete its startup. The blue 4-row leds start to blink but stops at a solid light at led no 3 (usr2) and then nothing happens. No USB serial and no network, and no WiFi. This is with or without cape attached.


b) The BBB Debian image provided by Beaglebone.org. 
Flashed to the EMMC this kernel boots as expected and connects to USB network and serial, fine with and without the cape. I cloned the GitHub repository at  https://github.com/fpga-logi/logi-apps and the one at https://github.com/fpga-logi/logi-tools and ran make, the programs I have used run fine, but no blink on any LED on the cape, close but no cigar.

Some outputs from the command-line

$ name -a

Linux beaglebone 4.4.30-ti-r64 #1 SMP Fri Nov 4 21:23:33 UTC 2016 armv7l GNU/Linux


$ cat /sys/devices/platform/bone_capemgr/slots 

 0: P-----  -1 BB-BONE-LOGIBONE,00R1,VALENTFX,BB-BONE-LOGIBONE

 1: PF----  -1 

 2: PF----  -1 

 3: PF----  -1 

 4: P-O-L-   0 Override Board Name,00A0,Override Manuf,cape-universaln


$ dmesg | egrep -i cape

[    0.000000] Kernel command line: console=ttyO0,115200n8 root=UUID=ac4731db-c4db-463f-9129-07e6746b98ba ro rootfstype=ext4 rootwait coherent_pool=1M quiet cape_universal=enable

[    2.420150] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,BWA5,1645BBWG0867'

[    2.420181] bone_capemgr bone_capemgr: compatible-baseboard=ti,beaglebone-black - #slots=4

[    2.458431] bone_capemgr bone_capemgr: slot #0: 'BB-BONE-LOGIBONE,00R1,VALENTFX,BB-BONE-LOGIBONE'

[    2.498410] bone_capemgr bone_capemgr: slot #1: No cape found

[    2.542403] bone_capemgr bone_capemgr: slot #2: No cape found

[    2.586402] bone_capemgr bone_capemgr: slot #3: No cape found

[    2.592443] bone_capemgr bone_capemgr: initialized OK.

[    3.602801] bone_capemgr bone_capemgr: loader: failed to load slot-0 BB-BONE-LOGIBONE:00R1 (prio 0)

[   46.281587] bone_capemgr bone_capemgr: part_number 'cape-universaln', version 'N/A'

[   46.281627] bone_capemgr bone_capemgr: slot #4: override

[   46.281643] bone_capemgr bone_capemgr: Using override eeprom data at slot 4

[   46.281661] bone_capemgr bone_capemgr: slot #4: 'Override Board Name,00A0,Override Manuf,cape-universaln'

[   46.940181] gpio-of-helper ocp:cape-universal: Allocated GPIO id=0

[   46.940393] gpio-of-helper ocp:cape-universal: Allocated GPIO id=1

[   46.940562] gpio-of-helper ocp:cape-universal: Allocated GPIO id=2

[   46.940718] gpio-of-helper ocp:cape-universal: Allocated GPIO id=3

[   46.940881] gpio-of-helper ocp:cape-universal: Allocated GPIO id=4

[   46.941034] gpio-of-helper ocp:cape-universal: Allocated GPIO id=5

[   46.941192] gpio-of-helper ocp:cape-universal: Allocated GPIO id=6

[   46.941358] gpio-of-helper ocp:cape-universal: Allocated GPIO id=7

[   46.941516] gpio-of-helper ocp:cape-universal: Allocated GPIO id=8

[   46.941669] gpio-of-helper ocp:cape-universal: Allocated GPIO id=9

[   46.941829] gpio-of-helper ocp:cape-universal: Allocated GPIO id=10

[   46.941981] gpio-of-helper ocp:cape-universal: Allocated GPIO id=11

[   46.942145] gpio-of-helper ocp:cape-universal: Allocated GPIO id=12

[   46.942299] gpio-of-helper ocp:cape-universal: Allocated GPIO id=13

[   46.960276] gpio-of-helper ocp:cape-universal: Allocated GPIO id=14

[   46.960539] gpio-of-helper ocp:cape-universal: Allocated GPIO id=15

[   46.960709] gpio-of-helper ocp:cape-universal: Allocated GPIO id=16

[   46.960885] gpio-of-helper ocp:cape-universal: Allocated GPIO id=17

[   46.961050] gpio-of-helper ocp:cape-universal: Allocated GPIO id=18

[   46.961209] gpio-of-helper ocp:cape-universal: Allocated GPIO id=19

[   46.961370] gpio-of-helper ocp:cape-universal: Allocated GPIO id=20

[   46.961621] gpio-of-helper ocp:cape-universal: Allocated GPIO id=21

[   46.961786] gpio-of-helper ocp:cape-universal: Allocated GPIO id=22

[   46.961956] gpio-of-helper ocp:cape-universal: Allocated GPIO id=23

[   46.962114] gpio-of-helper ocp:cape-universal: Allocated GPIO id=24

[   46.962278] gpio-of-helper ocp:cape-universal: Allocated GPIO id=25

[   46.974854] gpio-of-helper ocp:cape-universal: Allocated GPIO id=26

[   46.975114] gpio-of-helper ocp:cape-universal: Allocated GPIO id=27

[   46.975298] gpio-of-helper ocp:cape-universal: Allocated GPIO id=28

[   46.975482] gpio-of-helper ocp:cape-universal: Allocated GPIO id=29

[   46.975644] gpio-of-helper ocp:cape-universal: Allocated GPIO id=30

[   46.975810] gpio-of-helper ocp:cape-universal: Allocated GPIO id=31

[   46.975973] gpio-of-helper ocp:cape-universal: Allocated GPIO id=32

[   46.975985] gpio-of-helper ocp:cape-universal: ready

[   47.132644] bone_capemgr bone_capemgr: slot #4: dtbo 'cape-universaln-00A0.dtbo' loaded; overlay id #0


$ ls /dev

apm_bios         loop-control        spidev2.1  tty29  tty53   ubi_ctrl

ashmem           mapper              stderr     tty3   tty54   uhid

autofs           mem                 stdin      tty30  tty55   uinput

binder           memory_bandwidth    stdout     tty31  tty56   urandom

block            mmcblk1             tty        tty32  tty57   vcs

btrfs-control    mmcblk1boot0        tty0       tty33  tty58   vcs1

bus              mmcblk1boot1        tty1       tty34  tty59   vcs2

char             mmcblk1p1           tty10      tty35  tty6    vcs3

console          mqueue              tty11      tty36  tty60   vcs4

cpu_dma_latency  net                 tty12      tty37  tty61   vcs5

cuse             network_latency     tty13      tty38  tty62   vcs6

disk             network_throughput  tty14      tty39  tty63   vcs7

dri              null                tty15      tty4   tty7    vcsa

fb0              ppp                 tty16      tty40  tty8    vcsa1

fd               psaux               tty17      tty41  tty9    vcsa2

full             ptmx                tty18      tty42  ttyGS0  vcsa3

fuse             pts                 tty19      tty43  ttyO0   vcsa4

hwrng            random              tty2       tty44  ttyO1   vcsa5

i2c-0            rfkill              tty20      tty45  ttyO2   vcsa6

i2c-1            rtc                 tty21      tty46  ttyO3   vcsa7

i2c-2            rtc0                tty22      tty47  ttyO4   watchdog

initctl          shm                 tty23      tty48  ttyS0   watchdog0

input            snapshot            tty24      tty49  ttyS1   xconsole

kmem             snd                 tty25      tty5   ttyS2   zero

kmsg             spidev1.0           tty26      tty50  ttyS3

lightnvm         spidev1.1           tty27      tty51  ttyS4

log              spidev2.0           tty28      tty52  ttyS5


$ cat data.eeprom > /sys/bus/i2c/drivers/at24/2-0054/eeprom

$ 



$ ./logi_loader ~debian/Devlab/logi-apps/blink_led_app/logibone_r1_blink.bit 


LOGI_LOADER VERSION : 0.1.0


Compiled for LOGI-BONE 


Board variant is LOGIBONE_R1.5 


bit file size : 340703 


bitstream loaded, check done led 



Comments

Sign In or Register to comment.