jj777

Comments

• sudo i2cdetect -y 1 outputs: (note no "20" at (0,20)):      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f 00:          -- -- -- -- -- -- -- -- -- -- -- -- --  10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --  20: -- -- -- -- -- -- -- -- -- -- --…

  in Problem with running blink test. 'Init pin not going high!' Comment by jj777 June 2015
• The "dev/i2c-1 not found" issue has been solved by using "dtparam=i2c1=on" and not "dtparam=i2c_arm=on" in /boot/config.txthowever I still get the following message: Compiled for LOGI-PI Cannot detect LOGI-PI with I2C-LOADER, switching to old bit-…

  in Problem with running blink test. 'Init pin not going high!' Comment by jj777 June 2015
• Many thanks. I have tried all the solutions in the forum now without joy: 1. Used latest raspi wheezy image with logi-tools and logo-app cloned from github, running sudo install_logipi.sh, changing /boot/config.txt as indicated above, added the l…

  in Problem with running blink test. 'Init pin not going high!' Comment by jj777 June 2015
• In addition when I execute i2cdetect -y 1 the result is "Error: Could not open file 'dev/i2c-1' or 'dev/i2c/1': No such file or directoryExecuting i2cdetect -y 0 displays the usual matrix. How do I set up dev/i2c-1?

  in Problem with running blink test. 'Init pin not going high!' Comment by jj777 June 2015
• Hi I have a Raspberry PI B board. My LogiPi board is ver R1.5.1. I have downloaded and installed the above mentioned latest image logipi_150429_2015-02-16-raspian-wheezy.img During boot up when the Raspi config screen opens I have simply e…

  in Problem with running blink test. 'Init pin not going high!' Comment by jj777 June 2015