Forum

It looks like you're new here. If you want to get involved, click one of these buttons!

nickw

About

I hadn't specified PI_VER=PI2 PI2=1 before running the install script as the accepted answer didn't say you needed to - that has fixed it.

in Problem with running blink test. 'Init pin not going high!' Comment by nickw June 2015
I am having the same problem. From a new raspbian image have cloned the tools, run sudo ./install_logipi.sh modify /boot/config.txt with the following dtparam=spi=on dtparam=i2c_arm=on and /etc/modules has i2c-dev in it result of ./sudo made_de…

in Problem with running blink test. 'Init pin not going high!' Comment by nickw June 2015