It looks like you're new here. If you want to get involved, click one of these buttons!
KiwiSDR Suggested Improvements
KiwiSDR Problems and Issues
KiwiSDR Problems Now Fixed
KiwiSDR Signals Received
LOGI General Discussion
LOGI Troubleshooting Discussion
LOGI Projects Discussion
User Projects Discussion
In this Discussion
KiwiSDR and GNURADIO
edited May 2017
I juste whant to ask someone if if possible to get the 10khz to 30mhz from kiwisdr in to gnuradio for post traitement?
edited March 2017
Sorry, I missed this post because it wasn't in the KiwiSDR discussion category (the only one I monitor).
No, the Kiwi does not output a wide-band data stream on the Beagle Ethernet or USB. Most other SDRs output a wide-band "IF" signal (hundreds of kHz to several MHz or more) to USB 2.0 and narrow-band demodulation is done in software on a host computer.
But the Kiwi architecture is designed to be different (standalone, multi-user, Internet connected, etc.) and does demodulation internally, so no host computer is required (on the SDR side at least).
Powered by Vanilla